Posts tagged Automobile
Bleeding Rear Brakes On Hydraulic Suspension Citroëns
Question
I have problem with my Citroen CX 25 turbo 2 rear brakes. Front work perfect, but rear not! I changed 3 brake valves and same result. All spheres have proper pressure, so I have no idea how find solution.
Citroen Tech Tip
One thing that we have noticed lately here at Citroen Tech Tips is that quite a few people having trouble with bleeding down the rear brakes in most any of the Citroëns with Hydraulic suspension. More >
My 1987 Citroën CX Has Intermittent Hot Stall.
Question
My car is an 1987 Citroën CX that has an intermittent stall when the engine is hot. It starts straight away from the ignition switch. It doesn’t happen all the time.
Citroen Tech Tip:
The most likely cause is a bad ignition pick up sensor on the flywheel. We recommend everyone carry a spare with them. Because this is a very frequent problem an owner should always carry a spare. More >
So, You want to Flush out Your Citroen Hydraulic System?
So you want to flush out your Citroën hydraulic system?
OK, so one last hydraulic article and I will move on to other topics, but I couldn’t let you get away with out telling you about a hydraulic flushing product made by Total called Hydraurincage . We seem to call it Hydroflush over here, but Hydraurincage is the correct name for it from the mother land.
This is a good product that I personally have had some very good results with. More >
Setting the Dwell on Your Citroen Engine…
Here is a quick tip when setting the dwell on your Citroen Traction Avant 11B, the 11BL, or the 15/6. It also works on your Citroen D Model, both 3 main and 5 main bearing models. You can use it for the Citroen GS and pre 1982 GSA or the Citroen SM as well. It even works for the Citroen CX. For that matter, it works for any Citroen model that you may have that is equipped with a distributor with points. More >