Posts tagged Transmission
Checking the Bolts on the Citroën SM Gear Box
This is just a short reminder to all you Citroën SM lovers out there.
It is extremely important to get in the habit of checking and correcting, if necessary, the tightness of the bolts fastening the differential shaft extension housing to the Citroen SM gear box .
This should be checked after any repair involving removal of the motor, the gear box, the drive shafts or the front suspension units.
The tightening torque is 10.5 to 13.5 m.kg. (76 to 98 ft. lbs.)
Stay safe!
Denis
![Reblog this post [with Zemanta]](http://img.zemanta.com/reblog_e.png?x-id=f0a7c8d4-0c6c-4206-99a3-e54ae704d7da)
So, You want to Flush out Your Citroen Hydraulic System?
So you want to flush out your Citroën hydraulic system?
OK, so one last hydraulic article and I will move on to other topics, but I couldn’t let you get away with out telling you about a hydraulic flushing product made by Total called Hydraurincage . We seem to call it Hydroflush over here, but Hydraurincage is the correct name for it from the mother land.
This is a good product that I personally have had some very good results with. More >
Setting the Dwell on Your Citroen Engine…
Here is a quick tip when setting the dwell on your Citroen Traction Avant 11B, the 11BL, or the 15/6. It also works on your Citroen D Model, both 3 main and 5 main bearing models. You can use it for the Citroen GS and pre 1982 GSA or the Citroen SM as well. It even works for the Citroen CX. For that matter, it works for any Citroen model that you may have that is equipped with a distributor with points. More >